Goulds Water Technology
GT151TE IRRI-GATOR Self-Priming Single Phase Centrifugal Pump
Equipment Category:
Self-Priming End Suction - Centrifugal Pumps & Boosters
Self-Priming Design: Once pump is primed it never needs priming again even if water level drops below the end of the suction pipe. Pumping resumes once the water level rises above the end of the suction pipe.
Goulds GT151TE 2HP Water Well Irrigation Sprinkler Pump, Single Phase, 115/230V, Self Priming, TEFC Enclosure
Features
- Self-priming design - once pump is initially primed, filled with water, it will reprime when the water level rises above the end of the suction pipe
- Back pullout design allows disassembly of pump for service without disturbing piping
- Two compartment motor for easy access to motor wiring and replaceable components
- Bolt down diffuser (guidevane) provides positive alignment with impeller. F.D.A. compliant, injection molded, glass filled Lexan for durability and abrasion resistance
- Corrosion and abrasion resistant, glass filled Noryl impeller, F.D.A. compliant
- Electro-coat paint process is applied inside and out, then baked on for corrosion resistance
- Cast iron casing, 4-bolt, back pull-out design. Openings for vacuum gauge and casing drain
- Powered for continuous operation
- Rated within the motor manufacturer’s recommended working limits
- Can be operated continuously without damage
- Mechanical seal with carbon/ceramic faces, BUNA elastomers. 300 series stainless steel metal parts
- Diaphragm prevents the seal from running dry
- NEMA standard open drip proof motor
- Stainless steel shaft
- Built-in overload with automatic reset
|
Applications
- Lawn sprinkling
- Irrigation
- Air conditioning systems
- Heat pumps
- Water transfer
- De-watering
|
Type:
Centrifugal Pump
Series | GT Irri-gator |
Horsepower | 1-1/2 HP |
Voltage | 230 Volts |
Phase | 1 |
Frequency | 60 Hz |
Speed | 3500 RPM |
Suction Inlet | 1-1/2" NPT |
Discharge Connection | 1-1/2" NPT |
Flow at 5 ft | to 110 GPM |
---|
Max WP | 125 PSIG |
Pump Casing | Cast Iron |
Mechanical Seal: | Carbon/ceramic faces |
Impeller Material | Glass filled Noryl |
Elastomers | BUNA-N |
Maximum Water Temperature | 140°F |
Enclosure | TEFC |
Heads | to 128 ft. |