Goulds Water Technology
10GBC0712H0 High Pressure Multi Stage Booster Pump
Equipment Category:
Multi-Stage Pumps - Centrifugal Pumps & Boosters
10GBC0712H0 Multi-Stage Centrifugal Booster Pump, Three Phase, 208/230-460V, ODP Enclosure, Cast IronThe GB series High Pressure Multi-Stage Booster Pumps features a multi-stage design to provide steady, quiet & vibration-free operation. This Centrifugal pump has variable capacity. The design permits selection of flow within a range for each size. This GB pump comes in st & ard cast iron for general service. An O-Ring casing seal for reliable high pressure sealing with easy disassembly for maintenance. Impellers & Diffusers are a Glass Filled engineered composite material with fixed impeller design for high resistance to corrosion & abrasion. Bowls constructed of 300 series stainless steel with Rabbet lock for positive alignment with no gaskets required. The centrifugal pump design permits selection of flow within a range for each size. Pump uses close coupled NEMA 56J motor in open drip proof design. Ball bearings carry all radial & axial thrust loads.
Type:
Booster Pump
Specifications:
Horsepower: | 3/4 |
---|---|
Volts: | 208-230-460 |
Phase: | Three |
Enclosure: | ODP |
Stages: | 8 |
Maximum Flow: | 16 GPM |
---|---|
Minimum Flow: | 3 GPM |
Total Head: | up to 560 feet TDH |
Pipe Connections: | 1" NPT Discharge and Suction |
WARNINGS:
Pumps used on open spray applications must be plugged into electrical service which is protected by a Ground Fault Service Interrupter. Failure to do so may result in serious personal injury death and property damage.
- Do not run pump dry.- Do not run pump below minimum flow.
- If positive suction pressure is not available, be sure pump and suction line (with foot valve) are primed before starting pump.