Goulds Water Technology
10GBC0713H4 High Pressure Multi Stage Booster Pump
Equipment Category:
Multi-Stage Pumps - Centrifugal Pumps & Boosters
GB Series High Pressure, Multi-Stage Booster Pump, 10 GPM, Cast Iron, 3/4 HP, 208-230/460 Volt, 60 hz, Three Phase, Viton Mechanical Seal, ODP - Open Drip Proof Motor, 3500 RPM, 8 Stages, 1" NPT Suction, 1" NPT DischargeType:
Booster Pump
Specifications:
| Horsepower: | 3/4 |
|---|---|
| Frequency: | 60 Hz |
| Volts: | 575 |
| Phase: | Three |
| Housing Material: | Cast Iron |
| Motor type: | ODP |
| Material (Mechanical Seal): | Carbon vs. Silicaon Carbide |
| Stages: | 8 |
| Max Operating Temp: | 160 degrees |
|---|---|
| Speed (RPM): | 3500 |
| Maximum Flow: | 10 GPM |
| Minimum Flow: | 3 GPM |
| Max Head: | 600' |
| Pipe Connections: | 1" NPT Discharge and Suction |
WARNINGS:
Pumps used on open spray applications must be plugged into electrical service which is protected by a Ground Fault Service Interrupter. Failure to do so may result in serious personal injury death and property damage.
- Do not run pump dry.- Do not run pump below minimum flow.
- If positive suction pressure is not available, be sure pump and suction line (with foot valve) are primed before starting pump.