Parker Industrial
TITANFLEX Food Suction Hose - Series SW630

Application:

TITANFLEX® Food Suction Hose
Chlorobutyl Tube
FDA, PMO, USDA, 3-A
Series SW630

Non-fatty and non-oily foods, liquids, milk, potable water, sanitary products
In-plant and tank transfer
Delivery, transport

Series SW630 is a suction and discharge hose designed to handle non-fatty and non-oily foods, liquids, sanitary products and potable water in a variety of transfer applications. The hose is manufactured using polished stainless steel mandrels for an ultra-smooth tube that will not impart taste or odor, and is resistant to bacteria and microbes. The tube cleans easily with 10% alkali bath, hot water, or open-end low pressure steam to 15 psi (1.0 bar). The lightweight construction incorporates a dual wire helix that provides full suction capability, kink resistance and a path to conduct a static electrical charge to ground. The EPDM cover is resistant to abrasion, mild chemicals and ozone.

Design Factor: 4:1
Vacuum: Full
Industry Standards: FDA, PMO, USDA, 3-A

Tube:

White chlorobutyl

Reinforcement:

Multiple textile plies with dual wire helix

Cover:

Gray EPDM; wrapped finish

Temperature:

-40°F to +225°F (-40°C to +107°C)

Packaging:

Coils

Branding:

PARKER SERIES SW630 TITANFLEX® CHLOROBUTYL FOOD SUCTION MEETS FDA/3-A/USDA/PMO REQUIREMENTS (3-A LOGO) 200 PSI WP MADE IN USA

Couplings:

Contact JGB for proper fitting recommendation and coupling procedure.

Colors:

Gray with white stripe

Part No.	ID	ID	Reinf Plies	OD	OD	Approx Wt	Min Bend Rad	Max Rec WP	Std Pack	Request Quote
Part No.	(in)	(mm)	Reinf Plies	(in)	(mm)	(lbs/ft)	(in)	(psi)	Qty (ft)	Request Quote
SW630-1500	1-1/2	38.1	2	2.125	54	0.98	4.5	200	100	Request Quote
SW630-2000	2	50.8	2	2.641	67.1	1.37	6	200	100	Request Quote
SW630-2500	2-1/2	63.5	2	3.156	80.2	1.77	7.5	200	100	Request Quote
SW630-3000	3	76.2	2	3.703	94.1	2.23	9	200	100	Request Quote
SW630-4000	4	101.6	2	4.734	120.3	3.18	12	200	100	Request Quote

Warning!

Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working pressure of the hose. Refer to NAHAD Industrial Hose Assembly Guidelines.