Kanaflex
KanaPower (ST120 LT) Hose

Type:  Petroleum Hose

Vendor:  Kanaflex

Application:

Tank truck drop hose with static grounding wire; 50% lighter than conventional rubber hose.
Gasoline tank truck gravity drop hose for such items as:

• naphtha
• kerosene
• light and heavy oil
• diesel
• up to 15% gasohol

Features:

• Lightweight and flexible
• External helix provides for easy drag
• Rated for up to 40% aromatic content.

Note: Banding sleeves or banding coils must be used for all sizes.
Static wire must be properly embedded during fabrication and tested to assure static grounding of hose to a grounded system.

* Over flexing or repeated flexing of hose within 18" of fitting is a common cause of hose failure. Installing a 12"-14" section of our Banding Coil at the end of the hose should be considered.

Plastic banding sleeve for use with Kanapower ST 120 LT hose:

• 9" sections are recommended at each end of the ST 120 LT tank truck drop hose
• Available Sizes: 3" and 4"
• Temp. Range: -40°F to 140°F
• Construction: PVC construction, corrugated inside, smooth O.D.

Black or white PVC banding coil for the Kanapower ST 120 LT hose:

• available in 3" and 4" sizes
• Use approximately 4" of banding coil to cover a 9" length of each end of the ST 120 LT hose.

Tube:

Nitrile rubber static dissipating tube, rigid PVC helix, synthetic braiding, smooth bore, static grounding wire, corrugated O.D.

Temperature:

-30°F To 140°F

I.D.	O.D.	Pitch	Minimum Bend Radius	Working Pressure	Vacuum Rating	Weight	Standard Length	Request a Quote
Inches	Inches	Inches	72°F Inches	72°F PSI	72°F In/Hg	Lbs/Ft	Ft
2	2.68	.39	5.0	65	29.8	1.13	60, 100	Request Quote
3*	3.68	.59	6.0	65	29.8	1.37	60, 100	Request Quote
4*	4.82	.65	8.0	65	29.8	2.16	60, 100	Request Quote