Gates
LP350

Type:  Petroleum Hose

Sub Type:  Petroleum Petro Transfer Hose

Vendor:  Gates

Application:

Liquid or gaseous propane, butane or any combination of these two mixtures. Can be used for natural gas (not to exceed 50 psi) under certain conditions such as: open/outside areas and well ventilated factory buildings (if local building codes permit).

CAUTION: Not recommended for residential, office buildings or as fuel line hose on compressed natural gas vehicles. Contact JGB for inspection and assembly testing information.

Design Factor:

5:1

STANDARDS:

CAN/CGA–8.1–M86.
NFPA 58, Section 8–3.5.
Underwriters Laboratories Standard No. 21. (Applies to all sizes).

Tube:

Type A (Chloroprene). Black. 1 1/2" – 3".
Type C (Nitrile). Black. 1/4" – 1 1/4".

Reinforcement:

Braided, synthetic high tensile cord. 1 1/4" – 3".
High tensile synthetic textile cord. 1/4" – 1".

Cover:

Type A (Chloroprene). Black. All sizes are perforated.

Temperature:

-40°F to +180°F (-40°C to +82°C) continuous service.
Warning: Do not convey LP Gas over 140°F (60°C).

Packaging:

1 1/4": Packaged in 270’ to 330’ reels. Maximum of 3 pieces. Minimum length 25’.
1 1/2" through 3": Packaged 60’ in a carton.

Couplings:

72 Gates Power Crimp® for 3/4", 1 1/2" and 2" I.D. or 75 Gates GLX® sizes 1/4" to 1 1/4". For Power Crimp® ferrules, reference the Hose Coupling Section. Do not use male swivel, reusable or O–ring type couplings. For 3" I.D. use Dixon LP Boss only.

Category:

Petroleum Transfer Hose

Colors:

Black with black cover

Hose I.D.		Hose O.D.		Max. W.P.		Vac.	MBR	Wt. Per ft	Length	Std. Pack	Gates Item No.	Request a Quote
(in)	(mm)	(in)	(mm)	(psi)	(Bar)	(In. Hg)	(in)	(Lbs.)	(ft)
1/4	6.4	0.58	14.7	350	24.1	30	3	0.14	700	Reel	3220-1200	Request Quote
1/4	6.4	0.58	14.7	350	24.1	30	3	0.14	3700	PLT	3220-1201	Request Quote
3/8	9.5	0.74	18.8	350	24.1	30	3	0.21	700	Reel	3220-1202	Request Quote
3/8	9.5	0.74	18.8	350	24.1	30	3	0.21	2000	PLT	3220-1203	Request Quote
1/2	12.7	0.91	23.1	350	24.1	25	5	0.28	700	Reel	3220-1204	Request Quote
1/2	12.7	0.91	23.1	350	24.1	25	5	0.28	1000	PLT	3220-1205	Request Quote
3/4	19.1	1.23	31.2	350	24.1	20	6	0.44	100	Ctn	3220-1207	Request Quote
3/4	19.1	1.23	31.2	350	24.1	20	6	0.44	125	Ctn	3220-1208	Request Quote
3/4	19.1	1.23	31.2	350	24.1	20	6	0.44	150	Ctn	3220-1209	Request Quote
3/4	19.1	1.23	31.2	350	24.1	20	6	0.44	350	Reel	3220-1206	Request Quote
1	25.4	1.51	38.4	350	24.1	15	8	0.66	100	Ctn	3220-1211	Request Quote
1	25.4	1.51	38.4	350	24.1	15	8	0.6	125	Ctn	3220-1212	Request Quote
1	25.4	1.51	38.4	350	24.1	15	8	0.6	150	Ctn	3220-1213	Request Quote
1	25.4	1.51	38.4	350	24.1	15	15	0.63	200	Ctn	3220-1216	Request Quote
1	25.4	1.51	38.4	350	24.1	15	8	0.6	350	Reel	3220-1210	Request Quote
1 1/4	31.8	1.85	47	350	24.1	10	10	0.98	300	Reel	3220-0855	Request Quote
1 1/2	38.1	2.25	57.2	350	24.1	10	12	1.26	60	Ctn	3320-0935	Request Quote
2	50.8	2.86	72.6	350	24.1	10	14	1.84	50	Ctn	3320-0939	Request Quote
2	50.8	2.86	72.6	350	24.1	10	14	1.81	60	Ctn	3320-0938	Request Quote
3	76.2	3.88	98.6	350	24.1	10	24	2.58	60	Ctn	3320-0934	Request Quote