Thermoid
PILE DRIVER STEAM

Type:  Steam Hose

Vendor:  Thermoid

Application:

Pile Driver Steam hose is recommended for those applications where there is saturated steam service to +388°F on driving systems. This hose features an EPDM tube that is specifically compounded to resist permeation and prevent premature failure. The multiple plies of tire cord with plated steel cable reinforcement enable this hose to maintain a working pressure of 200 psi regardless which size hose you are using.

Oil Resistance:  Limited

Tube:

EPDM, also available in CR for oil resistance

Reinforcement:

Multiple plies tire cord and plated steel cable

Cover:

EPDM, also available in CR for oil resistance

Temperature:

Saturated steam service to +388°F (+198°C)

Packaging:

100 ft. maximum

Branding:

Thermoid HBD Industries Pile Driver Steam Hose 200 PSI WP Serial Number Made In USA

Couplings:

Contact JGB for proper hose fitting recommendation and coupling procedure.

Colors:

Black

STEAM HOSE WARNING
Steam heat is hotter than boiling water (212°F, 100°C) and increases in temperature as pressure increases. The danger from steam in industrial applications is due to the great heat and pressures involved. Water changes to steam at higher temperatures when under pressure. If the steam escapes, massive quantities of heat are released. This, combined with high pressures, can prove to be dangerous for the operator. Use only steam hoses designed for these applications. A steam hose should never be used to carry pressures or temperatures higher than it is rated to handle, in spite of any safety factor.

The dotted line shows the process of saturated steam being transformed into superheated steam. If a steam line is at a pressure of 150 psi, and a temperature of 366°F, it contains saturated steam. If the pressure is substantially reduced by the expansion of the steam (such as the sudden opening of a valve or the steam passing into a larger pipe or hose), the condition of the steam follows the dotted line to some point X in the superheated steam area. This condition may not last very long, but the superheated steam tends to deteriorate the tube stock in ordinary steam hose intended for use with saturated steam. This usually results in hose failure.

Product Number	Nominal I.D.		Nominal O.D.		Braids	Working Pressure		Min Bend Radius		Weight		Request a Quote
	in.	mm	in.	mm		psi	Mpa	in.	mm	lb/ft	Kg/m
34854634002	2	50.80	3.13	79.38	4	200	1.38	20.00	508.00	4.10	6.10	Request Quote
34854636002	2-1/2	63.50	3.38	85.73	4	200	1.38	25.00	635.00	5.40	8.04	Request Quote
34854638002	3	76.20	4.50	114.30	4	200	1.38	30.00	762.00	6.40	9.52	Request Quote
34854640002	4	101.60	5.63	142.88	4	200	1.38	40.00	1016.00	9.30	13.84	Request Quote
34854642002	6	152.40	7.81	198.44	6	200	1.38	60.00	1524.00	18.60	27.68	Request Quote