Gates
Marine Master™ Wet Exhaust 100D Hose

Type:  Marine Hose

Vendor:  Gates

Application:

Heavy–duty fabric reinforced. Designed for use where wire support is not required. Meets marine water and wet exhaust hose requirements. May be used for engine water circulation, discharge lines, heat exchangers and straight wet exhaust connections.

Design Factor:

4:1

STANDARDS:

Meets requirements of SAE J2006 R1.

Max. W.P.:

100 psi (6.9 Bar)

Tube:

Type P (EPDM). Black.

Reinforcement:

Two plies of synthetic fabric.

Cover:

Type P (EPDM). Black with blue stripe.

Temperature:

-40°F to +257°F (-40°C to +125°C) continuous service.

Packaging:

Pallet

Couplings:

Contact JGB for proper hose fitting requirements.

Lengths:

12.5 ft.

Hose I.D.		Hose O.D.		Wt. Per ea	Item No.	Request a Quote
(in)	(mm)	(in)	(mm)	(Lbs.)
1 1/8	28.6	1.4	35.6	5.59	3137-1207	Request Quote
1 1/4	31.8	1.53	38.9	6.07	3137-1209	Request Quote
1 3/8	34.9	1.69	42.9	6.58	3137-1213	Request Quote
1 1/2	38.1	1.78	45.2	7.12	3137-1215	Request Quote
1 5/8	41.3	1.91	48.5	7.63	3137-1217	Request Quote
1 3/4	44.5	2.03	51.6	8.15	3137-1219	Request Quote
1 7/8	47.6	2.19	55.9	8.63	3137-1221	Request Quote
2	50.8	2.32	58.9	9.18	3137-1223	Request Quote
2 1/8	54	2.45	62.2	9.69	3137-1225	Request Quote
2 1/4	57.2	2.57	65.3	10	3137-1227	Request Quote
2 3/8	60.3	2.69	68.3	10.7	3137-1229	Request Quote
2 1/2	63.5	2.82	71.6	11.24	3137-1231	Request Quote
2 5/8	66.7	2.95	74.9	11.79	3137-1233	Request Quote
2 3/4	69.9	3.09	78.5	12.29	3137-1235	Request Quote
2 7/8	73	3.23	82	12.8	3137-1237	Request Quote
3	76.2	3.36	85.3	14.45	3137-1239	Request Quote
3 1/2	88.9	3.86	98	16.63	3137-1245	Request Quote
4	101.6	4.36	110.7	18.57	3137-1249	Request Quote
4 1/2	114.3	4.86	123.4	21	3137-1252	Request Quote
5	127	5.37	136.4	23.35	3137-1253	Request Quote
6	152.4	6.38	162.1	27.14	3137-1254	Request Quote