Parker Industrial
DRAGON BREATH Chlorobutyl Compact Steam Hose - Series 7286C

Application:

DRAGON BREATH® Chlorobutyl Compact Steam Hose Non-Skive E-Z Crimp
Series 7286C

Saturated and superheated steam
Cleaning containment vessels and manufacturing equipment; cleaning and heating process equipment
Manufacturing and processing plants, refineries

Series 7286C is a compact, slim profile hose designed for long-lasting steam service—one of the toughest applications for hose, where the hot-cold/wet-dry cycling attacks rubber compounds externally as well as internally. The hose construction incorporates premium, high-performance chlorobutyl in both the tube and the cover, providing extreme heat resistance, durability, performance and service life. The wire braid reinforcement provides crush-resistant durability, kink resistance and a path to conduct a static electrical charge to ground, and the cover resists abrasion, cracking, hardening and ozone. Series 7286C is qualified with Parker non-skive crimp couplings for easy and quick assembly fabrication as well as maintenance-free service.

Design Factor: 10:1
Vacuum: Not recommended
Industry Standards: None applicable

Tube:

Black chlorobutyl

Reinforcement:

Multiple wire braids

Cover:

Black chlorobutyl; perforated wrapped finish

Temperature:

-40°F to +406°F saturated steam/+450°F superheated steam
(-40°C to +208°C saturated steam/+232°C superheated steam)

Packaging:

Cartons

Branding:

PARKER SERIES 7286C DRAGON BREATH® E-Z CRIMP BUTYL STEAM 250 PSI MAX WP MADE IN USA (DATE CODE)

Couplings:

Contact JGB for proper fitting recommendation and coupling procedure.

Colors:

Black

Part No.	ID	ID	Reinf Plies	OD	OD	Approx Wt	Min Bend Rad	Max Rec WP	Std Pack	Request Quote
Part No.	(in)	(mm)	Reinf Plies	(in)	(mm)	(lbs/ft)	(in)	(psi)	Qty (ft)	Request Quote
7286C-1002	1	25.4	2	1.467	37.3	0.64	12	250	50	Request Quote
7286C-502	1/2	12.7	2	0.95	24.1	0.37	7	250	50	Request Quote
7286C-752	3/4	19.1	2	1.2	30.5	0.47	9.5	250	50	Request Quote

Warnings!

Failure to properly inspect, maintain, test and use steam hose assemblies may result in property damage, personal injury or death. Refer to ARPM publication IP-11-1, "Guide for Use, Testing and Inspection of Steam Hose."
Water changes to hot water and phases of steam when subjected to heat and pressure. The greater the pressure, the higher the temperature required to achieve and maintain a steam phase. If steam escapes, dangerous quantities of heat may be released very suddenly. Exposure to hot water, low pressure steam and high pressure steam may cause severe scalding or fatal burns.
Use only hoses designated for steam service for steam applications.
Prior to use with detergents or rust inhibitors, contact JGB.
Drain steam hose after each use to reduce the possibility of hose popcorning while in service.
Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working pressure of the hose. Refer to the NAHAD Industrial Hose Assembly Guidelines.