Thermoid
BURSTPROOF OIL RESISTANT STEAM - Thermocure

Type:  Steam Hose

Vendor:  Thermoid

Application:

Thermoid’s Burstproof Oil Resistant Steam hose is designed for saturated steam service to +406°F and super-heated service to +450°F, where the cover may encounter petroleum products. Black and red color covers are available from stock. This hose has an EPDM cover and is reinforced with two braids of carbon steel wire providing flexibility and abrasion resistance. This durable hose provides a constant working pressure of 250 psi and is available in a range of sizes to fit most applications.

Oil Resistance:  Medium

Tube:

EPDM, RMA Class C

Reinforcement:

Two braids of carbon steel wire

Cover:

EPDM, RMA Class C

Temperature:

For saturated steam service to +406°F (+208°C)
Super-heated steam to +450°F (+232°C)

Packaging:

Reels – 1/2"-1" I.D. or 50 ft. lengths
2-1/2" I.D. – 50 ft. lengths

Branding:

BP Steam, 250# PSI WP Oil Resistant Made In USA

Couplings:

Contact JGB for proper hose fitting recommendation and coupling procedure.

Colors:

Black or Red

STEAM HOSE WARNING
Steam heat is hotter than boiling water (212°F, 100°C) and increases in temperature as pressure increases. The danger from steam in industrial applications is due to the great heat and pressures involved. Water changes to steam at higher temperatures when under pressure. If the steam escapes, massive quantities of heat are released. This, combined with high pressures, can prove to be dangerous for the operator. Use only steam hoses designed for these applications. A steam hose should never be used to carry pressures or temperatures higher than it is rated to handle, in spite of any safety factor.

The dotted line shows the process of saturated steam being transformed into superheated steam. If a steam line is at a pressure of 150 psi, and a temperature of 366°F, it contains saturated steam. If the pressure is substantially reduced by the expansion of the steam (such as the sudden opening of a valve or the steam passing into a larger pipe or hose), the condition of the steam follows the dotted line to some point X in the superheated steam area. This condition may not last very long, but the superheated steam tends to deteriorate the tube stock in ordinary steam hose intended for use with saturated steam. This usually results in hose failure.

Product Number	Nominal I.D.		Nominal O.D.		Braids	Working Pressure		Min. Bend Radius		Weight		Request a Quote
	in.	mm	in.	mm		psi	Mpa	in.	mm	lb/ft	Kg/m
Black
22062321662	1/2	12.70	1.06	26.99	2	250	1.72	3.00	76.20	0.38	0.57	Request Quote
22062481662	3/4	19.05	1.28	32.54	2	250	1.72	4.50	114.30	0.52	0.77	Request Quote
22062641662	1	25.40	1.53	38.89	2	250	1.72	7.00	177.80	0.77	1.15	Request Quote
01104426502	2-1/2	63.50	3.13	79.38	2	250	1.72	17.00	431.80	2.00	2.98	Request Quote
Red
22062322662	1/2	12.70	1.06	26.99	2	250	1.72	3.00	76.20	0.38	0.57	Request Quote
22062482662	3/4	19.05	1.28	32.54	2	250	1.72	4.50	114.30	0.52	0.77	Request Quote
22062642662	1	25.40	1.53	38.89	2	250	1.72	7.00	177.80	0.77	1.15	Request Quote