PVC In Line Check Valves T/S-611
Vendor: Legend Valve
Valve Type(s):
Thermoplastic Valves
Valve Category:
Thermoplastic Valves
Valve Subcategory
Ball Valves - I.P.S. and Solvent Ends
LEGEND MODELS T-611 AND S-611 PVC in-line check
valves are constructed of ASTM D1784 virgin PVC resin and
304 stainless steel. They give positive backflow prevention
with the use of a spring-loaded PVC poppet. They may be
installed horizontally or vertically.
• Manufactured in an ISO 9002 accredited facility
1/2 LB. 304 STAINLESS STEEL SPRING
PRESSURE RATING: 150 W.O.G. AT 73°F
MAXIMUM SERVICE TEMPERATURE: 140°F
• Manufactured in an ISO 9002 accredited facility
1/2 LB. 304 STAINLESS STEEL SPRING
PRESSURE RATING: 150 W.O.G. AT 73°F
MAXIMUM SERVICE TEMPERATURE: 140°F
| Request a Quote | Request Quote |
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| **The Cv Factor is the gallons of water per minute passed through the valve with a 1 PSI pressure | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |