Large Diameter Hose (LDH)
JGB’s Large Diameter Hose (LDH) division was born from our clients demand for quick response assemblies.
From standard Sewer By-pass, Well Point jobs and de-watering services to emergency response irrigation and flood zone application, JGB is there for you!
Features & Benefits
- Black nitrile rubber oil – resistant tube
- Polyester reinforcement-provides working service pressures equal to or higher than most conventional PVC or rubber discharge hoses
- Black ribbed nitrile rubber cover—provides high resistance to oil, weathering and abrasion
- Lighter, less bulky than most rubber discharge hoses less weight, easier to handle…stores in less space….provide sequal or better pressure handling capacity
- Unique woven construction and special compunding-resists kinking, stretching and twisting while in service….makes recoiling easier
- Wide range of applications --- Applications include irrigation, agriculture, general watering, dewatering, drainage,pump discharge, flotation booms, cable covering, industrial washdown and general discharge applications
- Service temperature: -20° F (-29°C) to176°F (+80° C )
Standard Suction Hoses
4”, 6”, 8” and 12” Suction applications to include Kanaline-SR and black 150 PSI rubber suction lines.
Fitting options: Bauer Type, Camlock and Flanged ends.
Click to view a full size photo
Standard Discharge Hoses
4”, 6”, 8” and 12” Discharge applications to include Oroflex 10/Gatorflow 150# Nitrile, Red mid-grade PVC and low pressure open end blue discharge.
Fitting options: Bauer Type, Camlock and Flanged ends.
Click to view a full size photo
OS&D Hose
3", 4", 6", 8", and 12" 250 PSI Oil Suction and Discharge with built-in Flanges each end. For the toughest jobs, OS&D is the answer. Available in 10’ and 20’ standard lengths.
Click to view a full size photo
Composite Hose
4”, 6”, 8” available in standard stock. 10” and 12” – available on special order. Ideal for high head applications and where high flexibility is required. 200 to 250 PSI, Fixed by Floating Flanges. Stock in Standard 20’ lengths.
Specialty Chemical Hose
3”, 4” and 6” Chemical Hose assemblies are ideal for Tank to Tank, High acid applications.
Fitting options: SS Camlock, SS Flanges.
Big Diameter Hose
Click to view a full size photo
High Pressure Hydraulic Assemblies
3/8” thru 1 1/4" in standard 50’ sections for your submersible Trash pump applications.
Fitting options: Male pipe, Female JIC and Hi-pressure Wing type couplers.
Hand Built Larger Diameter Hose
Click to view a full size photo
Bauer Type Fittings
Adaptors, Increasers and De-creasers, 45°, 90°, Bauer to Flange, Bauer to Camlock, Bauer to Strainer, Bauer to Pipe and O-Rings.
Bauer Type Pipe
6”, 8” and 12” – available in 10’ and 20’ sections.
Flapper Checks
4”, 6”, 8” and 12” Flanged each end. Backflow prevention valves.
Flange to Flange Adapters
4” to 6”, 6” to 8”, 8” to 12”, 10” to 14” - Eccentric or Concentric.
Gate Valves
4”, 6”, 8” and 12” Standard 150# Available up to 48”.
Accessories
Threaded Flanges, Black pipe, Vic ends, Bauer O-Rings, Nut & Bolt Flange kits, Full Face, Ring Type, Neoprene and Non-asbestos gaskets, High temp grease, E-rated bio oils in tote, drum or 5 gallon pail options.
Click to view a full size photo
Please click to view all photos
Contact:
Ron Ugalde
Cell Phone: (704) 564-1229
rugalde@jgbhose.com
1407 B Westinghouse Blvd.
Charlotte, NC 28273
Phone: (704) 588-9920
Fax: (704) 588-1032
Kevin Donovan
Cell Phone: 314-610-9685
kdonovan@jgbhose.com
9707 Green Park Industrial Dr .
St. Louis , MO 63123
Phone (314) 487-3144
Fax (314) 487-5581
Please feel free to contact us for more information.