Slim Hole Rotary Hose and API Fittings

---

Slim Hole Rotary Hose

Application:

High-pressure rotary hose for slim-hole, seismograph, work-over or portable drilling rigs. For use with small- to medium-blast, water-well or shot-hole drilling applications. Used in hydraulic oil, mud or air applications or where pulsating pump is required.

Inner Tube:

Neoprene

Reinforcement:

Four alternating layers of spiraled high-tensile steel wire for the SHR5000-16 (1") and SHR3650-32 (2"). Six alternating layers of spiraled high-tensile steel wire for the SHR5000-20 (1¼") through SHR5000-32 (2").

Cover:

Black Neoprene, Pin Pricked

Temperature:

-40ºF to 250ºF (-40ºC to 121ºC)

Fitting Reference:

All fittings compatible with Prospector Slim Hole Rotary Hose family are listed on the attached section of this specification sheet.

Packaging:

1" available in 50 FT Box or 200 FT Coil. 1¼," 1½," & 2" available in 131 FT Continuous Coils

Couplings:

Swage-on coupling; contact coupling manufacturer

Order Codes:

543-827 543-710 (ARC Treatment)

Descriptive Number	SAP Number	Hose size I.D.		Hose size O.D.		Max. Working Pressure		Min. Bend Radius		Min. Burst Pressure		Weight (lbs/foot)	Request a Quote
		INCH	DIN dash size	INCH	MM	PSI	MPA	INCH	MM	PSI	MPA
SHR5000-16	20476786	1	25	1.51	38.50	5000	34.5	12.0	305	20000	137.9	1.34	Request Quote
SHR5000-20	20476787	1-1/4	31	1.85	47.00	5000	34.5	16.5	419	20000	137.9	2.40	Request Quote
SHR5000-24	20476788	1-1/2	38	2.26	57.30	5000	34.5	20.0	508	20000	137.9	3.35	Request Quote
SHR5000-32	20476789	2	51	2.80	71.10	5000	34.5	25.0	635	20000	137.9	4.38	Request Quote
SHR3650-32	20476880	2	51	2.68	68.10	3650	25.2	28.0	711	14600	100.7	3.13	Request Quote

Fittings: Slim Hole Rotary Fittings meet API thread specifications.

---

---

API Fittings

Slim Hole Rotary Fittings
Descriptive Number	SAP Number	Hose size I.D.		Thread Size (A)	Hex-1 Size		Cut-off(C)		Length (L)		Skive Type	SHR 3750	SHR 5000	Request a Quote
		INCH	DIN dash size		Wrench Size	MM	INCH	MM	INCH	MM
SH-NPMAPI-1616	20466169	1	25.4	1-11½	17⁄16	36	2.66	67.5	5.18	131.5	NS		Y	Request Quote
SH-NPMAPI-2020	20466171	1-1/4	31.8	1¼-11½	17⁄8	46	2.93	74.5	6.69	170	NS		Y	Request Quote
SH-NPMAPI-2424	20466174	1½	38.1	1½-11½	2	50	3.27	83	6.53	166	NS		Y	Request Quote
SHDG-NPMAPI-3232	20466175	2	50.8	2-11½	25⁄8	65	4.47	113.5	8.19	208	Internal & External Skive		DGS2-32	Request Quote
SH-NPMAPI-3232	20263241	2	50.8	2-11½	25⁄8	65	4.47	113.5	8.19	208	NS	Y		Request Quote

 

SLIM Hole Rotary CRIMP Specifications

Fitting Family

Hose I.D. (INCH)

Hose Type

Insertion Length (INCH)

Skive Type

Internal Skive Length (INCH)

External Skive Length (INCH)

Crimp Length (INCH, tol +/-1⁄32")

Crimp Diameter (INCH, tol +/-1⁄32")

Crimper

Die Set

Approx. Setting

Request a Quote

INCH

MM

SH-***-16** (Ultra-Crimp Fitting)

1

SHr5000-16

217⁄32 (2.52)

Non-Skive

Full

1.728

43.9

PC150 PC150H PC200/PC400

41 Orange 41 41

2.9 290 2.9

Request Quote

SH-***-20** (Ultra-Crimp Fitting)

1¼

SHr5000-20

227⁄32 (2.835)

Non-Skive

Full

2.272

57.7

PC200

56

1.7

Request Quote

SH-***-24** (Ultra-Crimp Fitting)

1½

SHr5000-24

39⁄32 (3.268)

Non-Skive

Full

2.528

64.2

PC200/PC400

62

2.2

Request Quote

DgF2-32 (Dual-Grip Ferrule)

2

SHr5000-32

313⁄16 (3.819)

Internal & External Skive

15⁄32 (1.142)

311⁄32 (3.346)

Full

3.189

81.0

PC200

78

3.0

Request Quote

SH-***-32** (Ultra-Crimp Fitting)

2

SHr3750-32

33⁄8 (3.385)

Non-Skive

Full

3.043

77.3

PC200/PC400

74

3.3

Request Quote

Hammer Unions, Nut, Male Sub, Female Sub and Seals

• Three lug nuts and self-locking ACME threads provide quick make-up and break-out.
• Color coded for quick identification.
• Unique identification for sour gas unions. Some include elastomer seal depending on size, pressure rating and style.
• Meet or exceed National Association of Corrosion Engineers standard NACE MR-01-75 and API RP-14E.
• All materials used meet ASTM and/or AISI standards.
• All unions provide pressure-tight & positive sealing for low-pressure services (1,000 to 2,000 PSI).
• The spherical surface male sub and angular surface female sub form a metal-to-metal seal, the ball and tangent provides a perfect seal.
• Range from 1” to 12” with cold working pressures from 1,000 to 20,000 PSI.

---

---

Hammer Unions
Specifications for Threaded and Butt Weld Hammer Unions

---