Goulds Water Technology
PE31P1-Submersible Effluent Pump-Model PE31
Equipment Category:
Effluent Pumps - Wastewater & Drainage Pumps
Heavy duty, portable and compact effluent pump capable of handling up to 1/2" solids.
Features
- Corrosion resistant construction
- Cast iron body
- Thermoplastic impeller and cover
- Upper sleeve and lower heavy duty ball bearing construction
- Motor is permanently lubricated for extended service life
- Powered for continuous operation
- All ratings are within the working limits of the motor
- Quick disconnect power cord, 20 feet standard length, heavy duty 16/3 SJTW with NEMA 5-15P, three prong, 115 volt grounding plug
- Complete unit is heavy duty, portable and compact
- Mechanical seal is carbon, ceramic, BUNA and stainless steel
- Stainless steel fasteners
- Built-in thermal overload protection with automatic reset
- Class B insulation
- Oil-filled design motor
- High strength carbon steel shaft
|
Applications
- Mound systems
- Effluent/Dosing systems
- Low pressure pipe systems
- Basement draining
- Heavy duty sump/dewatering
|
Specifications
| Horsepower | 1/3 HP |
|---|
| Voltage | 115 Volts |
|---|
| Phase | 1 |
|---|
| Frequency | 60 Hz |
|---|
| Speed | 3000 rpm |
|---|
| Operation | Automatic |
|---|
| Float Switch Style | Piggyback Float Switch |
|---|
| Pump Body | Cast iron |
|---|
| Impeller Material | Thermoplastic |
|---|
| Discharge Size | 1-1/2" NPT |
|---|
| Maximum Flow | 53 gpm |
|---|
| Maximum Head | 25 ft |
|---|
| Flow at 5 ft | 52 gpm |
|---|
| |
|---|
| Flow at 10 ft | 42 gpm |
|---|
| Flow at 15 ft | 29 gpm |
|---|
| Flow at 20 ft | 16 gpm |
|---|
| Maximum Solids Handling | 1/2" |
|---|
| Minimum Basin Diameter | 18" |
|---|
| Motor Design | Shaded pole |
|---|
| Motor Insulation | Class B |
|---|
| Thermal Protection | Yes |
|---|
| Current | 12 Amps |
|---|
| Minimum Circuit Breaker | 20 |
|---|
| Maximum Temperature | 104°F |
|---|
| Cord Length | 20 ft |
|---|
