Goulds Water Technology
PE41M-Submersible Effluent Pump-Model PE41
Equipment Category:
Effluent Pumps - Wastewater & Drainage Pumps
Heavy duty, portable and compact effluent pump capable of handling up to 1/2" solids.
Features
- Corrosion resistant construction
- Cast iron body
- Thermoplastic impeller and cover
- Upper sleeve and lower heavy duty ball bearing construction
- Motor is permanently lubricated for extended service life
- Powered for continuous operation
- All ratings are within the working limits of the motor
- Quick disconnect power cord, 20 feet standard length, heavy duty 16/3 SJTW with NEMA 5-15P, three prong, 115 volt grounding plug
- Complete unit is heavy duty, portable and compact
- Mechanical seal is carbon, ceramic, BUNA and stainless steel
- Stainless steel fasteners
- Built-in thermal overload protection with automatic reset
- Class B insulation
- Oil-filled design motor
- High strength carbon steel shaft
|
Applications
- Mound systems
- Effluent/Dosing systems
- Low pressure pipe systems
- Basement draining
- Heavy duty sump/dewatering
|
Specifications
Horsepower | 4/10 HP |
Voltage | 115 Volts |
Phase | 1 |
Frequency | 60 Hz |
Speed | 3400 rpm |
Operation | Manual |
Float Switch Style | No Switch |
Pump Body | Cast iron |
Impeller Material | Thermoplastic |
Discharge Size | 1-1/2" NPT |
Maximum Flow | 61 gpm |
Maximum Head | 29 ft |
Flow at 5 ft | N/A |
Flow at 10 ft | 57 gpm |
Flow at 15 ft | 46 gpm |
Flow at 20 ft | 33 gpm |
Flow at 25 ft | 16 gpm |
Maximum Solids Handling | 1/2" |
Minimum Basin Diameter | 18" |
Motor Design | PSC (Permanent Split Capacitor) |
Motor Insulation | Class B |
Thermal Protection | Yes |
Current | 7.5 Amps |
Minimum Circuit Breaker | 15 |
Maximum Temperature | 104°F |
Cord Length | 20 ft |